«
»

First Pint

So I pulled the first pint(s) from the kegerator last night.

First Pint(s)

Right now things are pouring slowly and with a lot of foam. Hopefully I will be able to balance the system without too much trouble. As of now I do not know where the problem lies: the tubing, the keg, the beer, the gas, the temperature – lots of variables to figure out. Once things are up and running smoothly I’ll post some more pictures.

This entry was posted on Thursday, July 10th, 2008 at 2:05 pm and is filed under Homebrew. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

4 Responses to “First Pint”

  1. Garrett Says:
    July 10th, 2008 at 7:18 pm

    Foamy or not – it’s still beer on tap. BOOYA!!!

  2. andrew Says:
    July 11th, 2008 at 12:19 pm

    sweet! Is it a one tap system, or can you expand and have more kegs/taps?

  3. Brian Says:
    July 11th, 2008 at 1:55 pm

    The “stock” equipment is for a single tap tower, but I’ve already purchased a new tower with three taps on it – – for now it is a one tap system, but it will become a three tap system after I am feeling a bit more confident in what I am doing. SHWEET!

  4. andrew Says:
    July 19th, 2008 at 12:27 pm

    Cool! It wasn’t clear from the pics how much keg space there was. Kegging sure beats all of that bottle maintanence. Good luck with tuning the dispensing, there is plenty of info available online and you should be able to figure it out soon enough.

Leave a Reply